The Super Hinge Quick Fit line of exhaust fan hinging systems are designed for easy installations on exhaust fans that are in the stationary position and do not require disrupting the fan from service during the installation. The Super Hinge changes the way exhaust fans are hinged for cleaning and maintenance. Benefits of the Quick-fit include:
- Easy one man installation. Can be installed in under 15 minutes.
- Holding pin locks fan in place at 45 or 90 degree angle
- Can be installed on the fan without shutting the fan down.
- Prevents flexing of fan base with exceptional support.
- 30" hinges and larger come with the HD-Chain Kit for additional support.
- Adds support to fan base areas prone to failure / extends fan life
- Life Time Warranty for Service Life of Fan
- Made in the USA with UL Listed Approved Materials
In order to provide effective support and to safely hinge an exhaust fan using any Super Hinge exhaust fan hinging system, we highly recommend that you choose a model which supports anywhere from 2/3 to the entire fan base. By following the sizing guidelines, you not only ensure safe support of the thin material of the fan base, you also eliminate flexing and bending of the fan base which can compromise the seal between the bottom of the fan and the duct it is mounted to. Failure to do so greatly increases the risk of damaged fan bases, inefficient exhaust draw due to vacuum leaks, grease seepage and personal injury due to fan base or hinging failure.
|SKU||Coverage||Proper Size of Fan Base|
|QF-18||Provides 12" of coverage||Proper size of fan base 12" - 18"|
|QF-24||Provides 18" of coverage||Proper size of fan base 18" - 28"|
|QF-30||Provides 24" of coverage||Proper size of fan base 24" - 36"|
|QF-36||Provides 30" of coverage||Proper size of fan base 30" - 45"|
|QF-42||Provides 36" of coverage||Proper size of fan base 36" - 54"|
Hinge Kit Spec Sheet: Click to view and download
Installation Instructions: Click to view and download
Super Hinge Kit for Exhaust Fans for fans up to 250+ pounds,. SuperHinge comes in 18, 24, 30, 26, 42 or 48 inches long. Comes with two hinges, left and right, and self tapping sheet metal screws. Hinge has unique stopping feature that prevents the hinge from opening past a certain point. Make sure to install so that the grease drain aims down when the fan is tipped open. Also make sure that the electrical is long enough so that if the fan did tip all the way over that the electrical would be long enough. Made of heavy duty black powder coated metal and designed to last for years and years.