null
Big Dipper

Big Dipper W200-IS Automatic Grease Trap (20 GPM)

(1 review) Write a Review
SKU:
W200IS
MPN:
W200IS
Shipping:
Free Shipping
  • Big Dipper W200-IS Automatic Grease Trap (20 GPM) (W200IS)
  • Big Dipper W200-IS Automatic Grease Trap (20 GPM)
  • Big Dipper W200-IS Automatic Grease Trap (20 GPM)
  • Big Dipper W200-IS Automatic Grease Trap (20 GPM)
  • Big Dipper W200-IS Automatic Grease Trap (20 GPM)
$3,649.00

Description

The Drain-Net Big Dipper W-200-IS, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator for floor mounted or partially recessed installation, rated at 20 gallons per minute peak flow, 40 pounds of grease capacity and including as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, a lift-out strainer basket access, an internal stainless steel strainer basket for collection of coarse solids, and a separate grease and oils collection container. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with thermal overload protection with automatically resettable switch. Two (2) no-hub connectors for plumbing connection provided.

  • Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator assistance. Comes complete with 24-hour timer and Grease Collector.
  • Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
  • Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
  • Compact footprint.
  • Two (2) No-Hub Connectors provided.

 

Attributes Values
Number of Skimming Wheels 1
Maximum Inlet Flow Rate 20 GPM
Material Interior Rotationally Molded Polyethylene
Material Exterior 304 Stainless Steel, Bright Finish
Internal Solids Strainer Capacity 1.85 Gallons
Grease Retention Capacity 40+ Pounds
Electrical 115 VAC, 60 Hz, 520 Watts (4.5 Amps)
Skimming Rate 20 Pounds Per Hour

 

QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY.

 

View AllClose

Additional Information

Note:
Sales tax will be added to orders shipped to NC and CA
View AllClose

Videos Hide Videos Show Videos

1 Review

  • 5

    Muy bueno

    Posted by Oscar on 2nd Feb 2021

    Excelente producto y muy buen precio

View AllClose